Bell’O FP4858HG Universal Flat Mount Panel Audio Video System with Swivel TV Mounting
- Triple Play Multi-Option Flat Panel A/V System with Swivel Flat Panel Mounting options, plus Corner or Standard against the Wall settings.
- Holds most TV’s up to 52″ or 125lbs on the Top Shelf, same Weight rating for Swivel Wall Mounts Capability. Middle Shelf Weight Capacity of 50 lbs and the Bottom Shelf up to 75 lbs
- Accommodates up to 4A/V Components and a Center Channel Speaker
- CMS The Cable Management System allows you to neatly run and hide your Component Wires, Cables, and Interconnects so that they are hidden within the Stand.
- The Open Architecture Provides flow-through Ventilation keeping Components air cooled.
Product Description
The FP4858HG with it’s striking design can be configured to meet your display and room layout needs. Known as the “Triple Play” for it’s versatility of mounting options for a flat panel A/V system that features swivel TV mounting above the component stand. This high gloss black can hold most Flat panel TV’s up to 52″ or 125lbs and at least 4 A/V components. The rear mounting frame and universal swivel mount system can be removed to be used as a 3 shelf stand alone table while the swivel mounting system can be hung on a wall. It features black tempered safety shelves, and high gloss scratch resistant powder coated steel frame. The CMS (Cable Management System) hides and organizes the wiring and it’s open architecture provides flow-through ventilation…. More >>
Bell’O FP4858HG Universal Flat Mount Panel Audio Video System with Swivel TV Mounting
Like this post? Subscribe to RSS feed!
2 comments
L. Moniz on December 1, 2009 at 10:21 am
When I opened the box my first thought was “this has more parts than my first car had.”
I unpacked the box and moved the pieces to the location I wanted to place it at. Moving the box whole is a two person job at least. Once assembled, the stand would take two people to move it. Be warned it is heavy (glass and metal tend to be that)and moving it once assembled would be tricky as the frame is hard to reach and the glass really isn’t strong enough to take the full weight of the stand.
The stand went together in about an hour. All of the parts are clearly labeled and the screws provided fit the holes with only one exception. One of the holes that allows for adjusting the frame that holds the television was miscut and it shredded the threads of the bolt that should have fit in it. I’ll hit the local hardware store for options to replace the bolt. The frame will work without this one bolt, but it was there for a reason.
The frame itself is well put together, the welds are very clean and neat, the glass shelves are well cut and each shelf clearly only fits in one location. This is a well engineered and manufactured piece.
Really four and a half stars. Minus a little for the miscut hole.
Mark A. Dobie on December 1, 2009 at 12:27 pm
I ordered this stand online without looking at it. I had some reservations but I had found other Bell’O brand stands locally, just not this one. The box is around 150 lbs when it arrives. Keep a vacuum handy because styrofoam goes everywhere. The directions were easy to follow and the stand was very easy to put together. I mounted my TV on the arm connected to the stand. I wish it had one more set of holes to make my TV just a little lower, but the height is okay, closer than other stands I looked at. The red plastic package is the only one you need to open to put this stand together. The other package with silver mounting hardware is for the TV to attach to the brackets for on the wall or on the back arm of the stand. I found bolts that fit my TV after the first try, used a washer, then lock washer and my 65lb. TV is firmly attached to the Universal mount. The swivel function is great and with our heavy Plasma on it, it doesn’t move at all once fixed in the position you want it. I thought the hardware looked small and cheesy from photos but in reality, it is really beefy steel throughout. Great stand, well worth the money and you have the option of wall mount, arm mount or set the TV on the stand itself. I also like the ability to put the stand in a corner or against a wall. I’m very happy with this high quality stand.