Epson Stylus Pro 4880 Printer

4 comments

1. 

   J. Shetler on December 26, 2009 at 4:32 pm

   Well I was really excited about getting the 4880 but I have yet to get the first print off it. The box arrived in good shape but the printer had some broken parts in it and still does not work. The paper cover for the front paper tray was broken and the door and catch for the left side cartridge door was broken. The catch has to be replaced by a tech. Going through the steps of loading the ink cartridges I got error messages and have not yet got it working. So far I would say I am not impressed with Epson quality as all I have is a $2000 printer that still does not work a month after getting it. I hope we can get it working and up and going. Printer was bought new. Or at least it was supposed to be new.

2. 

   Steve Ferrerio on December 26, 2009 at 5:32 pm

   The Epson Stylus Pro 4880 is a Fantastic Printer. It make beautiful large relatively quick prints. One thing to keep in mind is that it’s more expensive to operate. It takes 8 ink cartridges at an average low price of around $40/$45 dollars a cartridge. So between that and the larger papers your expenses add up quickly. If you buy it from Amazon be aware to specify Fed Ex and not the free UPS shipping they offer. I took the free shipping and the one I received was opened up, damaged, parts missing with gaping holes in the box and only taped back together and USED. Make sure you specify Brand New.Which is what I finally received from Amazon. FedEx didn’t honor the 2 Day express that Amazon paid for. (they claimed bad weather) but the box was not damaged and the unit was perfect. I strongly recommend the Epson 4880.

3. 

   Robert Kaufman on December 26, 2009 at 7:01 pm

   I chose the Epson 4880 for several reasons: past experience with Epson products, my estimate of the printing cost and the quality of the samples I’ve seen. I have not been disappointed.

   Let’s start with the pros:
   
   Epson quality. After nearly a thousand 8 x 10″ (and equivalent) prints over the past three months, this printer looks and acts as good as new. No breakdowns, no degradation of print quality, nada.

   Economy. I keep a close watch on consumables. I’d estimate that my per-print cost is around USD 0.75 – 0.85 per 8 x 10″ page, excluding paper. This is considerably less than cheaper inkjet printers and with few notable exceptions, is unrivaled by same-class inkjets or most labs for that matter. My notable exception is the “minilab” class of device, which for an up-front investment of tens of thousands of dollars, can product 4 x 6″ prints for under a dime.

   Quality. This printer produces professional quality prints. I’ve had many compliments and never a complaint about the print quality.

   Now, the cons.
   
   Matte vs. Photo Black. If you want to switch between them, you’ll burn about USD 40-50 worth of ink each time you do this. As such, I started with the more versatile Photo Black cartridge and intend to stay with it through the life of this printer.

   Bulk. At 90 pounds, it’s difficult to take to events. A custom Pelican case for this printer will run several hundred dollars.

   All told, I’m very satisfied with my choice. Next time I’m in the market for a printer, I expect to purchase a descendant of this printer, perhaps one or two generations down the line.

4. 

   Chet Lee on December 26, 2009 at 9:53 pm

   I have been using this printer for about 3 weeks and it has worked wonderfully. The color profiles I’ve gotten from Epson and Ilford are close enough that I will not bother with custom profiling until I find a lot of spare time.

   Ink usage is pretty moderate. The instructions warn that the first time the printer is “Charged” there will be less ink available for use, but that it will be better when the next cartridge is inserted. I printed about 250 color 8×10 photos on 8.5×11 cut sheets plus a few 16×20 on roll before my black ink ran out.

   I really like this printer with 3 exceptions.
   
   1. It’s extremely large and heavy. It came on a pallet, large.
   
   2. Photo black and Matte black use the same slot so you’ll have to swap and waste a ton of ink to switch back and forth. I do little matte (for now) so it’s no big deal for me, but I think I will prob NEVER do anymore Matte until I get a big job that can cover my ink loss!
   
   3. The bottom print margin on cut sheet is .55 inches!
   
   So it cannot do borderless prints on cut sheet and most of the templates I used had to be modified to work around this huge bottom print margin!

   This caused a huge headache for me. However, once I rebuild my own scripts and templates, I believe I can work around this.

   Overall I really like the printer and one of the reasons I chose this printer over the 3800 is one that few people know about. The 4880 has this suction thing that will prevent the paper from curling up and hitting the print head. I had issues with this from time to time on my Canon i9900.

   So far the printer has been relatively fast for me and I am so confident in the prints that I just let it print and print. If there is an issue, with my print, it’s usually been a poor setup on my part (forgot to set proper profile, forgot about unusually LARGE print margin).

   I won’t give it 5 stars because I still want more for the price I paid for this printer. The .55in bottom print margin and swapping ink cartridges should be addressed before I can say that I would freely recommend this printer to anybody.

   However my prints look great and come out pretty quick!