Linksys by Cisco WET610N Wireless-N Ethernet Bridge with Dual-Band
- Convert any wired-Ethernet device to speedy Wireless-N Connectivity
- Optimized for video, so videos look smooth with less frame drops
- Compatible with any device that supports Wi-Fi standards and also with any operating system
- Easy setup and powerful security features, including WPA2 and Wi-Fi Protected Setup
- Measures 5.71 x 4.17 x 2.05 inches and weighs 5.61 ounces; 1-year limited warranty
Product Description
Move up to the Power of N! The versatile Wireless-N Ethernet Bridge with Dual-Band can make a wired Ethernet-enabled device a part of your wireless network. It’s optimized for streaming video to reduce glitches. It’s ideal for wirelessly sharing music, photos, movies, and other files around the home. Since the Bridge is based on dual-band Wireless-N, it works with any device supporting Wi-Fi standards, and is compatible with Wireless-G, -A, and -B. Connect digital video recorders, set-top boxes or computers to your Wireless-N network. Convert your wired-Ethernet printer, scanner, camera, storage device, notebook, or desktop for wireless connectivity. The Wireless-N Ethernet Bridge works on any platform and under any operating system. Since there are no drivers to load, setup is a snap – configure the network settings through your PC’s web browser, then plug it into your device and go. To protect your data and privacy, all wireless transmissions can be encr… More >>
Linksys by Cisco WET610N Wireless-N Ethernet Bridge with Dual-Band
| Other Helpful Posts |
| World Of Warcraft Is Now An Online Sport! E-sports (electronic sports) have been around for quite some time. Quake and Counter-Strike were the two most popular E-sports, with online... |
Like this post? Subscribe to RSS feed!
5 comments
Timothy Mckiernan on December 6, 2009 at 10:23 am
It doesn’t work worth a damn. Runs supper hot. It is a total rip off.
Carl Byrne on December 6, 2009 at 12:54 pm
I bought this based on the great reviews and disregarded any reviews I’d read complaining about the connectivity issue, as I’m pretty tech savy.
Now, having spend the last two days trying to get it to work, I should have heeded the warning signs.
I’ve been on the Linksys site trying to troubleshoot the connection, and have tried all the suggestions from google searches with absolutely no success.
The product is supposed to be plug and play, well, it is absolutely not! Even the CD with the PC drivers doesn’t work on my PC, however I’m trying to network this with my Mac, first and foremost.
My Airport Express 802.11n router is able to see the bridge, and I can assign an IP address, but no matter what I do, or how many times I reset it, the bridge will not connect my canon printer.
I waited for a half hour to talk to a rep via IM on the Linksys site, but while they responded to my questions, the only response that came through was the operators name and identifying employee number, so no matter what she typed back, I couldn’t read it. Useless.
I’ll be ebaying it tomorrow and buying a 75 foot ethernet cable instead. I wish I could charge Linksys for my wasted two days.
L. Walker on December 6, 2009 at 1:48 pm
I bought this to connect my windows vista desktop to my “N” network. First, I am only 45 feet from the router, and I only get 25% – 30% signal strength (my laptop gets a 90% “N” signal strength). Drops the signal constantly. I had to switch to my “G” network to get decent signal strength (80%). However, I periodically lose connection and have to unplug the WET610N and replug to get the connection back. I would not recommend to anyone.
M. Pagey on December 6, 2009 at 4:04 pm
I bought two of these devices. Both of them stop working after a few hours of operation. I can ping them but cannot communicate with the equipment attached to their ethernet port. Resetting them solves the problem temporarily but the same thing happens after a few more hours. Had to stop using them and buy an Apple Airport Express instead.
J. A. McCullers on December 6, 2009 at 6:31 pm
I couldn’t even get to step 2 of the setup because the CD setup program couldn’t recognize my network. Every FAQ addresses questions that come up AFTER this point…they all assume the install program works.