Sanus VMAA18S Articulating Wall Mount for 30″ to 50″ Displays
Oct 12, 2009 in
Electronics
- Weight capacity: 130 lbs.
- Extension arm extends display from 3 1/4″ to 19 1/2″ off wall
- Virtual Axis¿ tilt adjustment system
- Includes mounting hardware
The Sanus Systems VisionMount wall mount holds 30 – 50 inch Plasma and LCD TVs weighing up to 130 lbs to a vertical wall. It is a full motion mount that will tilt, swivel, extend and can roll ?6? to level the TV…. More >>
Sanus VMAA18S Articulating Wall Mount for 30″ to 50″ Displays
Like this post? Subscribe to RSS feed!
5 comments
T. Hoover on October 12, 2009 at 9:11 am
This is a high quality flat panel mount. Very well made and goes up fast. Amazon’s shipping was stellar! Got it in less than 3 days!!
Onegoodcop on October 12, 2009 at 9:16 am
If you have or are buying a big screen this is a must. This will make the most of your viewing. I plan on getting an other big screen in July. This is a must on my list.
olmstr on October 12, 2009 at 10:06 am
I had to cut the support bars, being a universal mount in all, there were no directions about how to accomplish this feat. One bar made two with much room to spare. The holes for the security screws on the bottom of the mount were not tapped, and the screws for the swing limiter were not included in the kit. What should have been a straight forward install turned into a three hour ordeal including trips to the hardware store.
Once together the mount is a thing of beauty, it works perfectly!!!! I would recommend this mount to anyone and everyone.
As a side note; I built a special wall for this mount and TV to hang on so I solid blocked the wall and added extra mounting bolts to the mount, probably not needed but the blocking was there so why not.
L. Dougherty on October 12, 2009 at 12:02 pm
The product itself is very good and I am VERY happy with the flexibility it offers to move/pivot the TV around. The two issues I had regard installation.
I mounted mine into a brick wall fireplace and bought mason anchor bolts with sleeves from Lowe’s, only lag bolts for stud mounting come with the kit. However once I got the TV on the mounting plate, the anchor sleeves started slipping out. To solve this I bought a tube of Loc-tite industrial adhesive, the kind you need a caulk gun for (about $7). Filled the anchor holes with it, put the sleeves/bolts/plate back on and let it set for 24hrs – no issues with slippage after that.
The other issue is getting the tv bracket on the mounting plate. I have a 46″ lcd tv and it was definitely a three man job. Part of this may have been due to moutning it in a corner, so the arm had to be bent 90 degrees. It looks easy to get the arm on the plate, but once the TV is attached its pretty difficult. Again maybe this is easier if the arm is straight.
All in all though it is a great mount. Great flexibility for viewing options.
G. Peterson on October 12, 2009 at 2:54 pm
This product was easy to install and holds my 42″ LCD quite well. Easy to move and change positions.