VideoSecu Articulating Wall Mount For Most 32″- 55″ LCD Plasma TV Monitor Flat Panel Screen Display VESA Up to 680×460 with 7 ft HDMI Cable MW370B
Dec 12, 2009 in
Computers & Software
- Fits most 32″ to 55″ TV. Please check the VESA and weight of your TV
- Free 7ft HDMI cable. Cable management on arm
- Supports screens up to 165 lbs
- Standard mounting screws both to wall and to monitor included
- Easy adjustment of tilt up and down to 15 degree.
Product Description
The universal articulating mount supports most displays up to 55″ with hole patterns up to 680mm(27″) horizontally and 460mm(18″) vertically. The mount features a full 26″ of extension and folds to a low 4″ profile, and it also features up to 180 degrees of rotation and +/-15 degrees of tilt. The mount is constructed with a 17.5″ width wall plate which is specially designed for installation up to 16″ studs…. More >>
VideoSecu Articulating Wall Mount For Most 32″- 55″ LCD Plasma TV Monitor Flat Panel Screen Display VESA Up to 680×460 with 7 ft HDMI Cable MW370B
Like this post? Subscribe to RSS feed!
5 comments
ee tech on December 12, 2009 at 10:21 am
There are better mounting supports – this is cheap and not worth the money. Spend a few bucks more
Aaron Hoover on December 12, 2009 at 1:09 pm
I bought this wall mount for my 58″ plasma that weighs in at 160 pounds. The installation is quick and easy, and this thing will hold some weight!
In order to set/adjust the tilt you will need to read the other reviews. They mention ways of sticking screws in the slot to stop the TV from dipping too far down. This is an easy fix. The only difference between the $$300 mount at the store and this one is you will need to do this for heavier TVs.
Save your money… Buy this.
Daniel A. Martinez on December 12, 2009 at 2:46 pm
Pros: It works
Cons: Didn’t come with the screws for my TV, came with a bunch of other screws for other TV sets but not my Sony Bravia 26″ HDTV KDL-M4000. I have to use my own screws until I can find a pair online somewhere.
Tat Ng on December 12, 2009 at 3:40 pm
I think this is a good bargain. Hold my 40″ Proscan LCD nicely (40 something pound).
It is not super heavy duty but strong enough for new larger LCD TVs
(you might want a heavy duty hanger for larger heavy plasma TVs)
1. You fist assemble the vertical bars then secure it to the wall.
2, You then attach the back plate and TV holding bar to your TV
(it even comes with spacer and many many screws for different type of VESA standard mount, nice!)
3. You then hang your TV to the mount (using the hooks on the top of the TV plate)
4. Slide your TV left or right to position you want
5. Adjust the tile angle with the built-in screw with handle (nice feature)
6. Screw down the 2 secure screws at the bottom of the mount so the TV will not accidentally pop-out.
7. Enjoy your TV.
This is really a good deal (Thirty something with shipping, very good deal).
BTW, the bubble level come in the mount is not mount properly. Use a good leveler instead.
This mount looks very much like the CheetaMount but cheaper.
R_BigDog on December 12, 2009 at 5:42 pm
I can’t believe there is a better wall mount kit than this one for the price paid. The packaging and directions were both very good and there were plenty of hardware (screws, bolts, washers, spacers, locking washers) packaged with this unit. I had no issues mounting a Philips 32″ LCD (vesa mount pattern 300×300) using the supplied hardware. I’m sure there are better TV wall mount systems out there, but I’m sure they will cost you more money. I don’t think those other units would make my TV work any better though!!